Clips for special use

	MODEL: SP10・SP10G(with cloth holder） Holizontal type pin chain This is most standard horizontal type of pin chain. Pitch size is 4inches(101.6mm). This chain can use a rail and a sprocket wheel by the same thing as a standard type.
MODEL: RP154 Roller chain type pin chain This is designed center pull system which the level of pin sheet is pisitioned the same level of roller chain. This chain has high stability and designed to minimize staining with oil. Pitch size is 4inches(101.6mm).
	MODEL: PM1B4 Clip chain This is clip chain for narrow width tenter machine and standardly used for finishing of silk cloth. Clip pitch is 3inches(76.2mm).
MODEL: MS type Sanforizing clip This is most standard clip for sanforizing machine and called Morrison type. Clip pitch is 2inches(50.8mm).
	MODEL: S10P Stenter clip combined with pins This is the S10 type with pin support and the most popular and versatile model. Clip pitch is 4inches(101.6mm).
MODEL: R224B1 Stenter clip This is powerful clip which designed for finishing of non-woven cloth. It has the edge of a multi-formula which can respond to the thickness of a processing cloth. Clip pitch is 4inches(101.6mm).
	MODEL: G803B Clip chain This is vertical type clip chain for non-woven cloth. Clip pitch is 66.68mm.
MODEL: HZ2CJ2 Roller chain type stenter clip combined pins. This is pin and clip type for heat treatment processing of a film. Its blade has multi formula edge for make clipping several thickness cloth by one blade. Clip pitch is 4inches(101.6mm).
	MODEL: R218 Roller chain type stenter clip. This clip is used for silk cloth in high speed operation. Clip pitch is 3inches(76.2mm).